Stowell Concrete Logo
Stowell Concrete Logo

Kerbs, Edgings & Channels to BS EN 1340

Products / Kerbs, Edgings & Channels
We can produce kerbs, channels and fitments to suit most requirements of the road builder. Our hydraulically-pressed pre-cast concrete units are strong and durable and manufactured to strict tolerances. Standard kerbs have a pimpled finish and come in a standard shade of concrete grey. 

There are three basic profiles available:
  • BULL-NOSED
  • HALF-BATTERED
  • FULL-BATTERED
Our straight kerbs are 913mm in length with the most commonly used being the half-battered profiles which provide a check element sufficient to warn motorists that they are close to the edge of the carriageway. They are normally used where a footpath is provided adjacent to the carriageway. Full-battered profile kerbs are used where a vehicle may need to ride up onto a verge in an emergency, for safety reasons these are not used when a footpath is present. Where a crossing is required for access to a private driveway, access point or pedestrian crossing, the appropriate tapers and crossing kerbs are used.
All products available ex works. Prices on application. Please contact the sales office for further information and a quotation. For information on packaging click here.
Download CE Declaration
Kerbs, edgings & channels

KERBS

Ref Fig W x H x L Type no. per tonne no. per pack
BN1 2 150 x 305 x913 Bull Nose Kerb 10 14
BN2 2 125 x 255 x 913 Bull Nose Kerb 14 16
BN3 2A 125 x 150 x 913 Bull Nose Kerb 23 16
SP2 5 125 x 255 x 913 Full Batter Kerb 15 8
SP3 5A 125 x 150 x 913 Full Batter Kerb 24 8
HB1 7 150 x 305 x 913 Half Batter Kerb 10 14
HB2 7 125 x 255 x 913 Half Batter Kerb 15 16
HB3 7A 125 x 150 x 913 Half Batter Kerb 24 16

EDGINGS

Ref Fig W x H x L Type no. per tonne no. per pack
EF 11 50 x 150 x 910 Square Top 63 40
EBN 13 50 x 150 x 910 Single Bull Nose 63 40
EF 11 50 x 200 x 910 Square Top 48 20
EBN 13 50 x 200 x 910 Single Bull Nose 48 20
EF 11 50 x 255 x 913 Square Top 36 20
EBN 13 50 x 255 x 913 Single Bull Nose 36 20

CHANNELS

Ref Fig W x H x L Type no. per tonne no. per pack
CS1 8 255 x 125 x 913 Square Channel 14 16
CS2 8 150 x 125 x 913 Square Channel 23 16
CD 255 x 125 x 913 Dished Channel 15 16
CD 150 x 125 x 913 Dished Channel 23 16
CD 150 x 100 x 913 Dished Channel 30 20
255 x 75 x 914 Fluted Channel 24 14





TRANSITIONAL KERBS


FITMENTS FOR KERBS

TAPERS AND CROSSING KERBS

Ref Fig W x H x L Type no. per tonne no. per pack
DL1/DR1 16 HB2-BN3 (fig.7-2A) Tapers 18 8
DL2/DR2 16 SP2-BN3 (fig.5-2A) Tapers 18 8
BN2-BN3 (fig.2-2A) Tapers 18 8
TL (fig.7 to 5) Transitional Kerbs 15 16
TR (fig.5 to 7) Transitional Kerbs 15 16
TL (fig.7 to 2) Transitional Kerbs 15 16
TR (fig.2 to 7) Transitional Kerbs 15 16
Q HB/BN/SP 14 305 x 255 Quadrants 24 15
Q HB† 14 455 x 255 Quadrants 10 8
IA HB/BN 125 x 255 x 305 Internal Angles 27 16
XA HB/BN 125 x 255 x 305 External Angles 27 16
† vibrated rather than hydraulically pressed
Whilst every effort is made to ensure that the colours do not vary, complete colour consistency cannot be guaranteed.

Radius Kerbs

RADIUS (r)
metres feet approx no. per circle
1.0 3 8
2.0 6 16
3.0 10 22
4.0 13 28
4.5 15 32
6.0 20 44
7.5 25 54
8.0 26 56
9.0 30 64
10.5 35 76
12.0 40 86
External radius (m)
Ref Fig Size 1 2 3 4 4.5 6 7.5 8 9 10.5 12
BN2 2 125 x 255 √ √ √ √ √
BN3 2A 125 x 150 √† √ √ √ √ √ √ √
SP2 5 125 x 255 √ √ √ √ √ √ √
HB2 7 125 x 255 √ √ √ √ √ √ √ √ √
DLI/DRI 16 HB2-BN3 √ √ √ √
Internal radius (m)
Ref Fig Size 3 4.5 6 7.5 9 10.5 12
BN2 2 125 x 255
BN3 2A 125 x 150 √ √ √ √ √ √ √
SP2 5 125 x 255
HB2 7 125 x 255 √ √ √ √ √ √ √
DLI/DRI 16 HB2-BN3

† vibrated rather than hydraulically pressed
√ from stock

Textured Kerbs and Edgings to BS EN 1340

Textured Kerbs

The textured kerb range builds on years of manufacturing experience, offering a more contemporary solution with an exposed surface finish.


Stowell Concrete have invested in secondary processing machinery to create the textured finish.

The textured kerbs are an upgrade to the traditional road kerbs, with the same strength and durability.

They are available in a bull-nosed profile, with a range of radii kerbs, tapers, quadrants, and angles to suit. 

Ref Fig W x H x L Type no. per tonne no. per pack
BN2 2 125 x 255 x 913 Bull Nose Kerb 14 16
BN3 2A 125 x 150 x 913 Bull Nose Kerb 23 16
BN2-BN3 16 BN2-BN3 (fig. 2-2A) Right Hand Tapers 18 16
BN2-BN3 16 BN2-BN3 (fig. 2-2A) Left Hand Tapers 18 16
EBN 13 50 x 150 x 910 Single Bull Nose Edging 63 40
EBN 13 50 x 200 x 910 Single Bull Nose Edging 48 20
EBN 13 50 x 255 x 910 Single Bull Nose Edging 36 20
QBN 14 305 x 255 BN Quadrants 24 15
IABN 14 125 x 255 x 305 BN Internal Angles 27 16
XABN 14 125 x 255 x 305 BN External Angles 27 16
Whilst every effort is made to ensure that the colours do not vary, complete colour consistency cannot be guaranteed.
External radius (m)
Ref Fig Size 3 4 4.5 6 7.5 8 9 10.5 12
BN2 2 125 x 255 √ √ √ √ √
BN3 2A 125 x 150 √ √ √ √ √ √ √
Internal radius (m)
Ref Fig Size 3 4.5 6 7.5 9 10.5 12
BN3 2A 125 x 150 √ √ √ √ √ √ √

Dimension Diagrams

KERBS, EDGINGS & CHANNELS

BN bull nose Kerb Stone
SP full batter Kerb Stone
HB half batter Kerb Stone
EF square Kerb Stone
EBN bull nose Kerb Stone
CS square channel Kerb Stone
CD dished channel Kerb Stone

FITMENTS FOR KERBS

Standard quadrants to match HB2 on BN2 Kerb Stones
Internal and external angles to match HB2 or BN2 Kerb Stones

TAPERS AND CROSSING KERBS

To match SP2, HB2 or BN2 L/H taper - Kerb Stones
BN3 crossing kerb - Kerb Stones
To match SP2, HB2 or BN2 R/H taper - Kerb Stones

RADIUS KERBS

Internal radius kerb - Kerb Stones
External radius kerb - Kerb Stones
*a
255mm x 125mm – 25mm deep
150mm x 125mm – 12mm deep
150mm x 100mm – 12mm deep
Share by: