Stowell solutions for
domestic and separating
floors to help satisfy Robust Details part E

T beam & block floor

(ceiling not shown)

T beam & recessed profile block floor

(ceiling not shown)

E-FC-6

• T beam and block floor with precast or insitu edge joists
• screed laid on Regupol E48 resilient layer system
• for use with dense aggregate block flanking walls only

E-FC-7

• T beam and block floor with precast or insitu edge joists
• using floating floor treatments
• for use with dense aggregate block flanking walls only


Part E (resistance to passage of sound) of the Building Regulations (England and Wales) Section 5: Internal walls and floors for new buildings, requires a minimum floor mass per unit area. For T beam and block the floor mass is 220kg/m2.

Robust Details are construction solutions which provide an alternative to pre-completion sound testing as a method of complying with Part E (resistance to the passage of sound) of the Building Regulations (England and Wales). Stowell concrete products enable builders to meet these regulations – provided the correct treatments are followed – when constructing new-build attached dwellings, flats and apartments.

A synopsis of the construction treatments is provided as shown, with full details available from Robust Details Ltd (telephone
0870 240 8209 or
www.robustdetails.com).


DOWNLOAD
PDF DATA SHEET
FOR THIS PRODUCT
PDF Data Sheet

All products are available ex works.
Prices on application.
Telephone our sales office for further information and quotations.